Geomembrane & Bentonite Clay (GCL) Lining Applications
We are the exclusive Irish agents and Distributors for some of the largest Geomembrane and Bentonite Clay Liner manufacturers in the world. These liners are performing successfully on hundreds of thousands of projects worldwide.
In 2009, we are over 22 years in the business of installing these types of lining systems, with 100% reliability guaranteed.
Typical Applications Include:
The majority of all geomembrane lining systems are fused together, panel by panel, by a method known as Hot Wedge Welding or Extrusion Welding techniques. All formed joints in the membrane can be both Destructively and Non-Destructively tested to ensure a 100% seam has been achieved.
Bentonite Clay Liners are installed side by side, with a 500mm overlap on the seam. This seam will sometimes be primed with Bentonite powder before the overlap takes place.
An overburden of backfill acting down on the Bentonite Clay Liner in conjunction with moisture absorbed into the liner from the ground below, transforms the GCL (Geocomposite Clay Liner) into a Gel-Like substance which is 100% waterproof.
 | |
 | |
 | |
 | |
 | |
 | |
 | |
 | |
 | |
 | |
 |
Copyright © 2008 Lining Services (Waterford) Ltd. All rights reserved.
Site Created and Maintained by WSI
This site is optimized for Netscape 9.0 and Internet Explorer 6.0 or higher. Please download an updated version.
Site Created and Maintained by WSI
This site is optimized for Netscape 9.0 and Internet Explorer 6.0 or higher. Please download an updated version.